The AeroTrap is an automated, above ground alternative to an in ground grease trap.

The AeroTrap provides more effective settling of solids than a conventional grease trap. The AeroTrap leans on the AeroDAF patented scum removal design to push off sludge from the tank. The floating grease can be periodically removed to the waste grease holding tank by hydraulically raising the level in the AeroTrap. The system not only removes this floating grease but also offers the added advantage of the 60-degree hopper bottom which allows for removal of settled solids without cleaning the entire tank.

This innovative, Aerofloat proprietary design has been successfully implemented as a pre-treatment step for heavy solids removal or to reduce the load on existing plants.

The AeroTrap uses the proprietary tank design exclusive to Aerofloat. The shape allows for a sealed and vented system to minimise odours. It also includes the 60-degree hopper bottom on which Aerofloat has completed extensive R&D to ensure solids will fall to the bottom without settling on the side of the tank.

For existing sites, this above ground installation allows for manufacturers needing to manage increased wastewater flow rates and alleviates the need for underground excavation.

Self Cleaning


The 60-degree hopper bottom is the key feature of the AeroTRAP, meaning that any fallen solids can be easily removed without emptying the entire tank.
Sealed and Vented

Sealed and Vented

Depending upon the design chosen, the AeroTRAP can be sealed and vented in the above ground tank. This minimises odours while still providing an accessible above ground collection point.
Cost Effective 1


The AeroTRAP is designed to be mechanically simple and is constructed from a polyethylene tank, resulting in a cost-effective solution.

Learn about AeroTRAP

What is AeroTRAP?

The AeroTrap settles solids more effectively than a conventional grease trap.

Aeofloat’s hopper bottom tank means that any fallen solids can be easily removed.

The AeroTrap is typically built with Aerofloat’s proprietary hopper bottom tanks.

Aerofloat has a range of sizes of these tanks and each can be made in polyethylene or stainless steel.

Case Studies

How can we help?

Whatever your wastewater challenge, we can develop a solution for you. Start by getting in touch with one of our experts.